LED bleue:
When using the app the LED behavior is as follows:
- The blue solid LED indicates your camera is connected.
- The blue LED blinking indicates the camera is being viewed using either the mobile app (provided that you have enabled ‘LED indication during streaming’ setting in the app settings). As soon as you stopped viewing the streaming using the mobile, it stops blinking.
- If you deactivate ‘LED indication during streaming’ and then view live streaming, the LED on the camera should be steady blue.
- LED should be steady blue if you close the app and view the camera only on the parent unit (if you have a parent unit) even if ‘LED indication during streaming’ is enabled.
Veuillez noter que tous les modèles de caméras n’ont pas l’option 'Indication LED pendant la diffusion'.
LED rouge, clignotant lentement:
- During setup, the LED starts to blink after a long press and hold of the ‘Pair’ button.
- After setup, the red blinking LED indicates that the camera is not connected, either because it is not connected to the router or it is connected to the router but not yet to the Internet or Hubble servers. Do a hard reset and register the camera to get the camera connected again.
LED rouge et bleue, clignotant lentement:
- Pendant la configuration, après avoir appuyé longuement sur le bouton 'Pair' et appuyer sur 'Continuer', indiquant que la caméra est en état de configuration. Vous pouvez le voir répertorié dans les paramètres Wi-Fi de votre appareil mobile.
- Lorsque vous retirez la caméra et que vous effectuez une réinitialisation matérielle, les voyants rouge et bleu alternent plus lentement.