First of all, make sure you have downloaded the correct app for your camera model:
- Download Motorola by Hubble Connected app – https://apps.apple.com/us/app/hubble-connected/id1483174430
- Créez un compte (ou connectez-vous si vous avez déjà un compte).
Assurez-vous d'avoir le mot de passe Wi-Fi® à portée de main. Si vous avez un appareil avec un moniteur parent, nous vous recommandons d'éteindre votre moniteur parent tout en ajoutant la caméra à l'application pour éviter toute interférence.
- Log into Motorola by Hubble Connected app and tap on + Add Camera.
- Tap on Baby or Home Monitoring (depending on the camera).
- Select your camera model from the available devices list.
- Entrez votre mot de passe Wi-Fi.
- Power on the camera and wait for the red LED to blink.
- Press and hold the pair button on the camera until you hear ‘Ready for Pairing’ voice message.
- You should hear a message: ‘Please generate the QR code and place it in the front of the camera’. Press on ‘Yes’.
- If you do not hear this message, then most probably your camera is not compatible with the Motorola by Hubble Connected app. Press on ‘No’ and you will be redirected to the screen with the link to download the correct app.
- Hold the mobile device 15-30 cm in front of the camera to generate the QR code.
- Tenez le téléphone pour scanner le code QR.
- Wait for some time for the camera to complete the setup.
- Name your device and press on Continue the stream to complete the QR code setup.
If for some reason setup using the QR code did not work, you can try setting up the camera with Wi-Fi:
1. Appuyez sur Essayer avec la configuration WiFi.
2. Go to Phone Settings and select camera SSID.
3. Return to the app to resume setup.
4. The camera should be detected.
5. Select your Wi-Fi network.
6. Enter the Wi-Fi network password.
7. Wait for some time for the camera to complete the setup.
8. Name your device and press on Start Viewing the stream.